original source here

Linux assemblers: A comparison of GAS and NASM

A side-by-side look at GNU Assembler (GAS) and Netwide Assembler (NASM)

17 Oct 2007

This article explains some of the more important syntactic and semantic differences between two of the most popular assemblers for Linux®, GNU Assembler (GAS) and Netwide Assembler (NASM), including differences in basic syntax, variables and memory access, macro handling, functions and external routines, stack handling, and techniques for easily repeating blocks of code.

Unlike other languages, assembly programming involves understanding the processor architecture of the machine that is being programmed. Assembly programs are not at all portable and are often cumbersome to maintain and understand, and can often contain a large number of lines of code. But with these limitations comes the advantage of speed and size of the runtime binary that executes on that machine.

Though much information is already available on assembly level programming on Linux, this article aims to more specifically show the differences between syntaxes in a way that will help you more easily convert from one flavor of assembly to the another. The article evolved from my own quest to improve at this conversion.

This article uses a series of program examples. Each program illustrates some feature and is followed by a discussion and comparison of the syntaxes. Although it's not possible to cover every difference that exists between NASM and GAS, I do try to cover the main points and provide a foundation for further investigation. And for those already familiar with both NASM and GAS, you might still find something useful here, such as macros.

This article assumes you have at least a basic understanding of assembly terminology and have programmed with an assembler using Intel® syntax, perhaps using NASM on Linux or Windows. This article does not teach how to type code into an editor or how to assemble and link (but see the sidebar for a quick refresher). You should be familiar with the Linux operating system (any Linux distribution will do; I used Red Hat and Slackware) and basic GNU tools such as gcc and ld, and you should be programming on an x86 machine.

Now I'll describe what this article does and does not cover.

Building the examples

Assembling:
GAS:
as –o program.o program.s

NASM:
nasm –f elf –o program.o program.asm

Linking (common to both kinds of assembler):
ld –o program program.o

Linking when an external C library is to be used:
ld –-dynamic-linker /lib/ld-linux.so.2 –lc –o program program.o

This article covers:

Basic syntactical differences between NASM and GAS
Common assembly level constructs such as variables, loops, labels, and macros
A bit about calling external C routines and using functions
Assembly mnemonic differences and usage
Memory addressing methods

This article does not cover:

The processor instruction set
Various forms of macros and other constructs particular to an assembler
Assembler directives peculiar to either NASM or GAS
Features that are not commonly used or are found only in one assembler but not in the other

For more information, refer to the official assembler manuals (see Resources for links), as those are the most complete sources of information.

Basic structure

Listing 1 shows a very simple program that simply exits with an exit code of 2. This little program describes the basic structure of an assembly program for both GAS and NASM.

Listing 1. A program that exits with an exit code of 2

Line

NASM

GAS

; Text segment begins
section .text

global _start

; Program entry point
_start:

; Put the code number for system call
 mov   eax, 1

; Return value
 mov   ebx, 2

; Call the OS
 int   80h

# Text segment begins
.section .text

.globl _start

# Program entry point
_start:

# Put the code number for system call
 movl  $1, %eax

/* Return value */
 movl  $2, %ebx

# Call the OS
 int   $0x80

Now for a bit of explanation.

One of the biggest differences between NASM and GAS is the syntax. GAS uses the AT&T syntax, a relatively archaic syntax that is specific to GAS and some older assemblers, whereas NASM uses the Intel syntax, supported by a majority of assemblers such as TASM and MASM. (Modern versions of GAS do support a directive called .intel_syntax, which allows the use of Intel syntax with GAS.)

The following are some of the major differences summarized from the GAS manual:

AT&T and Intel syntax use the opposite order for source and destination operands. For example:
- Intel: mov eax, 4
- AT&T: movl $4, %eax
In AT&T syntax, immediate operands are preceded by $; in Intel syntax, immediate operands are not. For example:
- Intel: push 4
- AT&T: pushl $4
In AT&T syntax, register operands are preceded by %; in Intel syntax, they are not.
In AT&T syntax, the size of memory operands is determined from the last character of the opcode name. Opcode suffixes of b, w, and l specify byte (8-bit), word (16-bit), and long (32-bit) memory references. Intel syntax accomplishes this by prefixing memory operands (not the opcodes themselves) with byte ptr, word ptr, and dword ptr. Thus:
- Intel: mov al, byte ptr foo
- AT&T: movb foo, %al
Immediate form long jumps and calls are lcall/ljmp $section, $offset in AT&T syntax; the Intel syntax is call/jmp far section:offset. The far return instruction is lret $stack-adjust in AT&T syntax, whereas Intel uses ret far stack-adjust.

In both the assemblers, the names of registers remain the same, but the syntax for using them is different as is the syntax for addressing modes. In addition, assembler directives in GAS begin with a ".", but not in NASM.

The .text section is where the processor begins code execution. The global (also .globl or .global in GAS) keyword is used to make a symbol visible to the linker and available to other linking object modules. On the NASM side of Listing 1, global _start marks the symbol _start as a visible identifier so the linker knows where to jump into the program and begin execution. As with NASM, GAS looks for this _start label as the default entry point of a program. A label always ends with a colon in both GAS and NASM.

Interrupts are a way to inform the OS that its services are required. The int instruction in line 16 does this job in our program. Both GAS and NASM use the same mnemonic for interrupts. GAS uses the 0x prefix to specify a hex number, whereas NASM uses the h suffix. Because immediate operands are prefixed with $ in GAS, 80 hex is $0x80.

int $0x80 (or 80h in NASM) is used to invoke Linux and request a service. The service code is present in the EAX register. A value of 1 (for the Linux exit system call) is stored in EAX to request that the program exit. Register EBX contains the exit code (2, in our case), a number that is returned to the OS. (You can track this number by typing echo $? at the command prompt.)

Finally, a word about comments. GAS supports both C style (/* */), C++ style (//), and shell style (#) comments. NASM supports single-line comments that begin with the ";" character.

Variables and accessing memory

This section begins with an example program that finds the largest of three numbers.

Listing 2. A program that finds the maximum of three numbers

Line

NASM

GAS

; Data section begins
section .data

var1 dd 40

var2 dd 20

var3 dd 30


section .text

global _start

_start:

; Move the contents of variables
 mov   ecx, [var1]
 cmp   ecx, [var2]
 jg    check_third_var
 mov   ecx, [var2]

check_third_var:
 cmp   ecx, [var3]
 jg    _exit
 mov   ecx, [var3]

_exit:
 mov   eax, 1
 mov   ebx, ecx
 int   80h

// Data section begins
.section .data

var1:
 .int 40
var2:
 .int 20
var3:
 .int 30

.section .text

.globl _start

_start:

# move the contents of variables
 movl  (var1), %ecx
 cmpl  (var2), %ecx
 jg    check_third_var
 movl  (var2), %ecx

check_third_var:
 cmpl  (var3), %ecx
 jg    _exit
 movl  (var3), %ecx

_exit:
 movl  $1, %eax
 movl  %ecx, %ebx
 int   $0x80

You can see several differences above in the declaration of memory variables. NASM uses the dd, dw, and db directives to declare 32-, 16-, and 8-bit numbers, respectively, whereas GAS uses the .long, .int, and .byte for the same purpose. GAS has other directives, too, such as .ascii, .asciz, and .string. In GAS, you declare variables just like other labels (using a colon), but in NASM you simply type a variable name (without the colon) before the memory allocation directive (dd, dw, etc.), followed by the value of the variable.

Line 18 in Listing 2 illustrates the memory indirect addressing mode. NASM uses square brackets to dereference the value at the address pointed to by a memory location: [var1]. GAS uses a circular brace to dereference the same value: (var1). The use of other addressing modes is covered later in this article.

Using macros

Listing 3 illustrates the concepts of this section; it accepts the user's name as input and returns a greeting.

Listing 3. A program to read a string and display a greeting to the user

Line

NASM

GAS

section .data

prompt_str  db   'Enter your name: '

; $ is the location counter
STR_SIZE  equ  $ - prompt_str

greet_str  db  'Hello '


GSTR_SIZE  equ  $ - greet_str


section .bss

; Reserve 32 bytes of memory
buff  resb  32

; A macro with two parameters
; Implements the write system call
%macro write 2
 mov   eax, 4
 mov   ebx, 1
 mov   ecx, %1
 mov   edx, %2
 int   80h
%endmacro


; Implements the read system call
%macro read 2
 mov   eax, 3
 mov   ebx, 0
 mov   ecx, %1
 mov   edx, %2
 int   80h
%endmacro


section .text

global _start

_start:
 write prompt_str, STR_SIZE
 read  buff, 32

; Read returns the length in eax
 push  eax

; Print the hello text
 write greet_str, GSTR_SIZE

 pop   edx

; edx  = length returned by read
 write buff, edx

_exit:
 mov   eax, 1
 mov   ebx, 0
 int   80h

.section .data

prompt_str:
 .ascii "Enter Your Name: "
pstr_end:
 .set STR_SIZE, pstr_end - prompt_str

greet_str:
 .ascii "Hello "

gstr_end:
 .set GSTR_SIZE, gstr_end - greet_str

.section .bss

// Reserve 32 bytes of memory
.lcomm  buff, 32

// A macro with two parameters
//  implements the write system call
.macro write str, str_size
 movl  $4, %eax
 movl  $1, %ebx
 movl  \str, %ecx
 movl  \str_size, %edx
 int   $0x80
.endm


// Implements the read system call
.macro read buff, buff_size
 movl  $3, %eax
 movl  $0, %ebx
 movl  \buff, %ecx
 movl  \buff_size, %edx
 int   $0x80
.endm


.section .text

.globl _start

_start:
 write $prompt_str, $STR_SIZE
 read  $buff, $32

// Read returns the length in eax
 pushl %eax

// Print the hello text
 write $greet_str, $GSTR_SIZE

 popl  %edx

// edx = length returned by read
write $buff, %edx

_exit:
 movl  $1, %eax
 movl  $0, %ebx
 int   $0x80

The heading for this section promises a discussion of macros, and both NASM and GAS certainly support them. But before we get into macros, a few other features are worth comparing.

Listing 3 illustrates the concept of uninitialized memory, defined using the .bss section directive (line 14). BSS stands for "block storage segment" (originally a block was started by a symbol), and the memory reserved in the BSS section is initialized to zero during the start of the program. Objects in the BSS section have only a name and a size, and no value. Variables declared in the BSS section don't actually take space, unlike in the data segment.

NASM uses the resb, resw, and resd keywords to allocated byte, word, and dword space in the BSS section. GAS, on the other hand, uses the .lcomm keyword to allocate byte-level space. Notice the way the variable name is declared in both versions of the program. In NASM the variable name precedes the resb (or resw or resd) keyword, followed by the amount of space to be reserved, whereas in GAS the variable name follows the .lcomm keyword, which is then followed by a comma and then the amount of space to be reserved. This shows the difference:

NASM: varname resb size

GAS: .lcomm varname, size

Listing 3 also introduces the concept of a location counter (line 6). NASM provides a special variable (the $ and $$ variables) to manipulate the location counter. In GAS, there is no method to manipulate the location counter and you have to use labels to calculate the next storage location (data, instruction, etc.).

For example, to calculate the length of a string, you would use the following idiom in NASM:

prompt_str db 'Enter your name: ' STR_SIZE equ $ - prompt_str ; $ is the location counter

The $ gives the current value of the location counter, and subtracting the value of the label (all variable names are labels) from this location counter gives the number of bytes present between the declaration of the label and the current location. The equ directive is used to set the value of the variable STR_SIZE to the expression following it. A similar idiom in GAS looks like this:

prompt_str: .ascii "Enter Your Name: " pstr_end: .set STR_SIZE, pstr_end - prompt_str

The end label (pstr_end) gives the next location address, and subtracting the starting label address gives the size. Also note the use of .set to initialize the value of the variable STR_SIZE to the expression following the comma. A corresponding .equ can also be used. There is no alternative to GAS's set directive in NASM.

As I mentioned, Listing 3 uses macros (line 21). Different macro techniques exist in NASM and GAS, including single-line macros and macro overloading, but I only deal with the basic type here. A common use of macros in assembly is clarity. Instead of typing the same piece of code again and again, you can create reusable macros that both avoid this repetition and enhance the look and readability of the code by reducing clutter.

NASM users might be familiar with declaring macros using the %beginmacro directive and ending them with an %endmacro directive. A %beginmacro directive is followed by the macro name. After the macro name comes a count, the number of macro arguments the macro is supposed to have. In NASM, macro arguments are numbered sequentially starting with 1. That is, the first argument to a macro is %1, the second is %2, the third is %3, and so on. For example:

%beginmacro macroname 2 mov eax, %1 mov ebx, %2 %endmacro

This creates a macro with two arguments, the first being %1 and the second being %2. Thus, a call to the above macro would look something like this:

macroname 5, 6

Macros can also be created without arguments, in which case they don't specify any number.

Now let's take a look at how GAS uses macros. GAS provides the .macro and .endm directives to create macros. A .macro directive is followed by a macro name, which may or may not have arguments. In GAS, macro arguments are given by name. For example:

.macro macroname arg1, arg2 movl \arg1, %eax movl \arg2, %ebx .endm

A backslash precedes the name of each argument of the macro when the name is actually used inside a macro. If this is not done, the linker would treat the names as labels rather then as arguments and will report an error.

Functions, external routines, and the stack

The example program for this section implements a selection sort on an array of integers.

Listing 4. Implementation of selection sort on an integer array

Line

NASM

GAS

section .data

array db
 89, 10, 67, 1, 4, 27, 12, 34,
    86, 3

ARRAY_SIZE equ $ - array


array_fmt db "  %d", 0


usort_str db "unsorted array:", 0


sort_str db "sorted array:", 0


newline db 10, 0



section .text
extern puts

global _start

_start:

 push  usort_str
 call  puts
 add   esp, 4

 push  ARRAY_SIZE
 push  array
 push  array_fmt
 call  print_array10
 add   esp, 12

 push  ARRAY_SIZE
 push  array
 call  sort_routine20

; Adjust the stack pointer
 add   esp, 8

 push  sort_str
 call  puts
 add   esp, 4

 push  ARRAY_SIZE
 push  array
 push  array_fmt
 call  print_array10
 add   esp, 12
 jmp   _exit

 extern printf

print_array10:
 push  ebp
 mov   ebp, esp
 sub   esp, 4
 mov   edx, [ebp + 8]
 mov   ebx, [ebp + 12]
 mov   ecx, [ebp + 16]

 mov   esi, 0

push_loop:
 mov   [ebp - 4], ecx
 mov   edx, [ebp + 8]
 xor   eax, eax
 mov   al, byte [ebx + esi]
 push  eax
 push  edx

 call  printf
 add   esp, 8
 mov   ecx, [ebp - 4]
 inc   esi
 loop  push_loop

 push  newline
 call  printf
 add   esp, 4
 mov   esp, ebp
 pop   ebp
 ret

sort_routine20:
 push  ebp
 mov   ebp, esp

; Allocate a word of space in stack
 sub   esp, 4

; Get the address of the array
 mov   ebx, [ebp + 8]

; Store array size
 mov   ecx, [ebp + 12]
 dec   ecx

; Prepare for outer loop here
 xor   esi, esi

outer_loop:
; This stores the min index
 mov   [ebp - 4], esi
 mov   edi, esi
 inc   edi

inner_loop:
 cmp   edi, ARRAY_SIZE
 jge   swap_vars
 xor   al, al
 mov   edx, [ebp - 4]
 mov   al, byte [ebx + edx]
 cmp   byte [ebx + edi], al
 jge   check_next
 mov   [ebp - 4], edi

check_next:
 inc   edi
 jmp   inner_loop

swap_vars:
 mov   edi, [ebp - 4]
 mov   dl, byte [ebx + edi]
 mov   al, byte [ebx + esi]
 mov   byte [ebx + esi], dl
 mov   byte [ebx + edi], al

 inc   esi
 loop  outer_loop

 mov   esp, ebp
 pop   ebp
 ret

_exit:
 mov   eax, 1
 mov   ebx, 0
 int   80h

.section .data

array:
 .byte  89, 10, 67, 1, 4, 27, 12,
        34, 86, 3

array_end:
 .equ ARRAY_SIZE, array_end - array

array_fmt:
 .asciz "  %d"

usort_str:
 .asciz "unsorted array:"

sort_str:
 .asciz "sorted array:"

newline:
 .asciz "\n"


.section .text


.globl _start

_start:

 pushl $usort_str
 call  puts
 addl  $4, %esp

 pushl $ARRAY_SIZE
 pushl $array
 pushl $array_fmt
 call  print_array10
 addl  $12, %esp

 pushl $ARRAY_SIZE
 pushl $array
 call  sort_routine20

# Adjust the stack pointer
 addl  $8, %esp

 pushl $sort_str
 call  puts
 addl  $4, %esp

 pushl $ARRAY_SIZE
 pushl $array
 pushl $array_fmt
 call  print_array10
 addl  $12, %esp
 jmp   _exit



print_array10:
 pushl %ebp
 movl  %esp, %ebp
 subl  $4, %esp
 movl  8(%ebp), %edx
 movl  12(%ebp), %ebx
 movl  16(%ebp), %ecx

 movl  $0, %esi

push_loop:
 movl  %ecx, -4(%ebp)
 movl  8(%ebp), %edx
 xorl  %eax, %eax
 movb  (%ebx, %esi, 1), %al
 pushl %eax
 pushl %edx

 call  printf
 addl  $8, %esp
 movl  -4(%ebp), %ecx
 incl  %esi
 loop  push_loop

 pushl $newline
 call  printf
 addl  $4, %esp
 movl  %ebp, %esp
 popl  %ebp
 ret

sort_routine20:
 pushl %ebp
 movl  %esp, %ebp

# Allocate a word of space in stack
 subl  $4, %esp

# Get the address of the array
 movl  8(%ebp), %ebx

# Store array size
 movl  12(%ebp), %ecx
 decl  %ecx

# Prepare for outer loop here
 xorl  %esi, %esi

outer_loop:
# This stores the min index
 movl  %esi, -4(%ebp)
 movl  %esi, %edi
 incl  %edi

inner_loop:
 cmpl  $ARRAY_SIZE, %edi
 jge   swap_vars
 xorb  %al, %al
 movl  -4(%ebp), %edx
 movb  (%ebx, %edx, 1), %al
 cmpb  %al, (%ebx, %edi, 1)
 jge   check_next
 movl  %edi, -4(%ebp)

check_next:
 incl  %edi
 jmp   inner_loop

swap_vars:
 movl  -4(%ebp), %edi
 movb  (%ebx, %edi, 1), %dl
 movb  (%ebx, %esi, 1), %al
 movb  %dl, (%ebx, %esi, 1)
 movb  %al, (%ebx,  %edi, 1)

 incl  %esi
 loop  outer_loop

 movl  %ebp, %esp
 popl  %ebp
 ret

_exit:
 movl  $1, %eax
 movl  0, %ebx
 int   $0x80

Listing 4 might look overwhelming at first, but in fact it's very simple. The listing introduces the concept of functions, various memory addressing schemes, the stack and the use of a library function. The program sorts an array of 10 numbers and uses the external C library functions puts and printf to print out the entire contents of the unsorted and sorted array. For modularity and to introduce the concept of functions, the sort routine itself is implemented as a separate procedure along with the array print routine. Let's deal with them one by one.

After the data declarations, the program execution begins with a call to puts (line 31). The puts function displays a string on the console. Its only argument is the address of the string to be displayed, which is passed on to it by pushing the address of the string in the stack (line 30).

In NASM, any label that is not part of our program and needs to be resolved during link time must be predefined, which is the function of the extern keyword (line 24). GAS doesn't have such requirements. After this, the address of the string usort_str is pushed onto the stack (line 30). In NASM, a memory variable such as usort_str represents the address of the memory location itself, and thus a call such as push usort_str actually pushes the address on top of the stack. In GAS, on the other hand, the variable usort_str must be prefixed with $, so that it is treated as an immediate address. If it's not prefixed with $, the actual bytes represented by the memory variable are pushed onto the stack instead of the address.

Since pushing a variable essentially moves the stack pointer by a dword, the stack pointer is adjusted by adding 4 (the size of a dword) to it (line 32).

Three arguments are now pushed onto the stack, and the print_array10 function is called (line 37). Functions are declared the same way in both NASM and GAS. They are nothing but labels, which are invoked using the call instruction.

After a function call, ESP represents the top of the stack. A value of esp + 4 represents the return address, and a value of esp + 8 represents the first argument to the function. All subsequent arguments are accessed by adding the size of a dword variable to the stack pointer (that is, esp + 12, esp + 16, and so on).

Once inside a function, a local stack frame is created by copying esp to ebp (line 62). You can also allocate space for local variables as is done in the program (line 63). You do this by subtracting the number of bytes required from esp. A value of esp – 4 represents a space of 4 bytes allocated for a local variable, and this can continue as long as there is enough space in the stack to accommodate your local variables.

Listing 4 illustrates the base indirect addressing mode (line 64), so called because you start with a base address and add an offset to it to arrive at a final address. On the NASM side of the listing, [ebp + 8] is one such example, as is [ebp – 4] (line 71). In GAS, the addressing is a bit more terse: 4(%ebp) and -4(%ebp), respectively.

In the print_array10 routine, you can see another kind of addressing mode being used after the push_loop label (line 74). The line is represented in NASM and GAS, respectively, like so:

NASM: mov al, byte [ebx + esi]

GAS: movb (%ebx, %esi, 1), %al

This addressing mode is the base indexed addressing mode. Here, there are three entities: one is the base address, the second is the index register, and the third is the multiplier. Because it's not possible to determine the number of bytes to be accessed from a memory location, a method is needed to find out the amount of memory addressed. NASM uses the byte operator to tell the assembler that a byte of data is to be moved. In GAS the same problem is solved by using a multiplier as well as using the b, w, or l suffix in the mnemonic (for example, movb). The syntax of GAS can seem somewhat complex when first encountered.

The general form of base indexed addressing in GAS is as follows:

%segment:ADDRESS (, index, multiplier)

%segment:(offset, index, multiplier)

%segment:ADDRESS(base, index, multiplier)

The final address is calculated using this formula:

ADDRESS or offset + base + index * multiplier.

Thus, to access a byte, a multiplier of 1 is used, for a word, 2, and for a dword, 4. Of course, NASM uses a simpler syntax. Thus, the above in NASM would be represented like so:

Segment:[ADDRESS or offset + index * multiplier]

A prefix of byte, word, or dword is used before this memory address to access 1, 2, or 4 bytes of memory, respectively.

Leftovers

Listing 5 reads a list of command line arguments, stores them in memory, and then prints them.

Listing 5. A program that reads command line arguments, stores them in memory, and prints them

Line

NASM

GAS

section .data

; Command table to store at most
;  10 command line arguments
cmd_tbl:
 %rep 10
    dd 0
 %endrep

section .text

global _start

_start:
; Set up the stack frame
 mov   ebp, esp
; Top of stack contains the
;  number of command line arguments.
; The default value is 1
 mov   ecx, [ebp]

; Exit if arguments are more than 10
 cmp   ecx, 10
 jg    _exit

 mov   esi, 1
 mov   edi, 0

; Store the command line arguments
;  in the command table
store_loop:
 mov   eax, [ebp + esi * 4]
 mov   [cmd_tbl + edi * 4], eax
 inc   esi
 inc   edi
 loop  store_loop

 mov   ecx, edi
 mov   esi, 0

 extern puts

print_loop:
; Make some local space
 sub   esp, 4
; puts function corrupts ecx
 mov   [ebp - 4], ecx
 mov   eax, [cmd_tbl + esi * 4]
 push  eax
 call  puts
 add   esp, 4
 mov   ecx, [ebp - 4]
 inc   esi
 loop  print_loop

 jmp   _exit

_exit:
 mov   eax, 1
 mov   ebx, 0
 int   80h

.section .data

// Command table to store at most
//  10 command line arguments
cmd_tbl:
 .rept 10
    .long 0
 .endr

.section .text

.globl _start

_start:
// Set up the stack frame
 movl  %esp, %ebp
// Top of stack contains the
//  number of command line arguments.
// The default value is 1
 movl  (%ebp), %ecx

// Exit if arguments are more than 10
 cmpl  $10, %ecx
 jg    _exit

 movl  $1, %esi
 movl  $0, %edi

// Store the command line arguments
//  in the command table
store_loop:
 movl  (%ebp, %esi, 4), %eax
 movl  %eax, cmd_tbl( , %edi, 4)
 incl  %esi
 incl  %edi
 loop  store_loop

 movl  %edi, %ecx
 movl  $0, %esi



print_loop:
// Make some local space
 subl  $4, %esp
// puts functions corrupts ecx
 movl  %ecx, -4(%ebp)
 movl  cmd_tbl( , %esi, 4), %eax
 pushl %eax
 call  puts
 addl  $4, %esp
 movl  -4(%ebp), %ecx
 incl  %esi
 loop  print_loop

 jmp   _exit

_exit:
 movl  $1, %eax
 movl  $0, %ebx
 int   $0x80

Listing 5 shows a construct that repeats instructions in assembly. Naturally enough, it's called the repeat construct. In GAS, the repeat construct is started using the .rept directive (line 6). This directive has to be closed using an .endr directive (line 8). .rept is followed by a count in GAS that specifies the number of times the expression enclosed inside the .rept/.endr construct is to be repeated. Any instruction placed inside this construct is equivalent to writing that instruction count number of times, each on a separate line.

For example, for a count of 3:

.rept 3 movl $2, %eax .endr

This is equivalent to:

movl $2, %eax movl $2, %eax movl $2, %eax

In NASM, a similar construct is used at the preprocessor level. It begins with the %rep directive and ends with %endrep. The %rep directive is followed by an expression (unlike in GAS where the .rept directive is followed by a count):

%rep nop %endrep

There is also an alternative in NASM, the times directive. Similar to %rep, it works at the assembler level, and it, too, is followed by an expression. For example, the above %rep construct is equivalent to this:

times nop

And this:

%rep 3 mov eax, 2 %endrep

is equivalent to this:

times 3 mov eax, 2

and both are equivalent to this:

mov eax, 2 mov eax, 2 mov eax, 2

In Listing 5, the .rept (or %rep) directive is used to create a memory data area for 10 double words. The command line arguments are then accessed one by one from the stack and stored in the memory area until the command table gets full.

As for command line arguments, they are accessed similarly with both assemblers. ESP or the top of the stack stores the number of command line arguments supplied to a program, which is 1 by default (for no command line arguments). esp + 4 stores the first command line argument, which is always the name of the program that was invoked from the command line. esp + 8, esp + 12, and so on store subsequent command line arguments.

Also watch the way the memory command table is being accessed on both sides in Listing 5. Here, memory indirect addressing mode (line 33) is used to access the command table along with an offset in ESI (and EDI) and a multiplier. Thus, [cmd_tbl + esi * 4] in NASM is equal to cmd_tbl(, %esi, 4) in GAS.

Conclusion

Even though the differences between these two assemblers are substantial, it's not that difficult to convert from one form to another. You might find that the AT&T syntax seems at first difficult to understand, but once mastered, it's as simple as the Intel syntax.

Resources

Learn

Consult the NASM and GAS manuals for complete introductions to these two assemblers:
- GAS: GNU Assembler
- NASM: Netwide Assembler
Read this Wikipedia entry for an explanation of selection sort.
In the developerWorks Linux zone, find more resources for Linux developers, and scan our most popular articles and tutorials.
See all Linux tips and Linux tutorials on developerWorks.
Stay current with developerWorks technical events and Webcasts.

Get products and technologies

Order the SEK for Linux, a two-DVD set containing the latest IBM trial software for Linux from DB2®, Lotus®, Rational®, Tivoli®, and WebSphere®.
With IBM trial software, available for download directly from developerWorks, build your next development project on Linux.

Discuss

Get involved in the developerWorks community through blogs, forums, podcasts, and community topics in our new developerWorks spaces.

About the author


		Ram holds a post graduate degree in computer science and is working as a software engineer in IBM's India Software Labs in the Rational Division, developing and adding features to Rational Clearcase. He has worked on various flavours of Linux/UNIX and Windows, along with real-time mobile-based operating systems like Symbian and Windows mobile. In his spare time, he hacks Linux and reads books.

Just K2

2007年10月23日星期二